Categories :

How do I configure my Cisco 7912 IP phone?

How do I configure my Cisco 7912 IP phone?

Using the Phone’s Network Configuration Screen (Cisco IP Phone Models 7905G/7912G) Step 1 Press the Menu button. Step 2 Use the Navigation button to select Settings, and then press the Select softkey. Step 3 Use the Navigation button to select Network Configuration, and then press the Select softkey.

How do I setup a Cisco VoIP phone?

Configure Cisco CallManager

  1. Go to the main menu window, choose Device > Phone > Add a New Phone, and then select Cisco IP Communicator from the Phone type pull-down menu.
  2. Click Next in order to get to the Phone Configuration window.
  3. Click Insert.
  4. Click OK in order to get to the Directory Number Configuration window.

How do I configure my Cisco 7940 IP phone?

How do I configure my Cisco 7940/7960 for SIP service?

  1. Press the Settings key. The Settings menu is displayed.
  2. Highlight Status.
  3. Press the Select soft key. The Setting Status menu is displayed.
  4. Highlight Firmware Versions.
  5. Press the Select soft key. The Firmware Versions panel is displayed.

Why is my Cisco phone not registering?

These are several of the issues that might cause a Cisco IP Phone not to register: Auto-registration is disabled on Cisco CallManager. The Cisco IP Phone is not receiving the DHCP server address. The Cisco IP Phone is not receiving the IP address, subnet mask or default router address.

How do I access my Cisco phone settings?

Use Cisco Unified CallManager Administration to modify > Device > Phone > Phone Configuration. URL of the help text that appears on the phone. Use Cisco Unified CallManager Administration > > Device > Phone > Phone Configuration.

How do I connect my Cisco IP phone to my network?

Connecting your CISCO VoIP Phone Device to the Network

  1. Locate the white ethernet jack in your workspace.
  2. Plug one end of an ethernet cable into the white jack, and the other end into the ethernet port on the back of the phone device.
  3. The phone will power on if connected properly.

What are the steps to configure VoIP phone?

Learn how to set up a VoIP phone system, step-by-step.

  1. Test Your Network and Internet Connection.
  2. Invest In The Right VoIP Hardware.
  3. Find a VoIP Provider with the Right Features.
  4. How to Get a Business Phone Number.
  5. Set Up Your VoIP Phone System.
  6. Test Your New VoIP Lines.
  7. Train Your Staff to Get The Most Out of VoIP Features.

How does a Cisco IP phone work?

How VoIP Works: At a Glance. With VoIP, analog voice calls are converted into packets of data. The packets travel like any other type of data, such as e-mail, over the public Internet and/or any private Internet Protocol (IP) network. Using a VoIP service, you can call landline or cell phones.

How do I configure my IP phone?

IP Phone Setup Guide

  1. Plug the phone in and connect it to your network.
  2. Find the IP address of the phone through the phone menu system.
  3. Go to any computer on your network and open its web browser.
  4. You can configure up to 2 extension numbers by default into the phone.
  5. Go to the Axon web panel -> Extensions section.

How do I connect my Cisco IP phone to my computer?

First, disconnect the Ethernet cable from the computer and attach it to the network port on the back of your phone. Next, use the Ethernet cable included with your phone to connect the access port on the back of your phone to your desktop computer. Your Cisco IP Phone now shares a network connection with your computer.

How do I reprogram my Cisco phone?

Unplug the power cable from the phone, and then plug in the cable again: the phone begins its power up cycle. The Headset/Mute & Speaker buttons flash in sequence indicating you may enter the reset key sequence. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

How do I re register my Cisco phone?

How to re-register Cisco IP Phone 7975 to Cisco Unified Communications Manager (CUCM)

  1. Go to “Settings” (a button on the phone) -> “Security Configuration” -> “Trust List.
  2. If you see the locked lock icon, you need to unlock it by pressing **# and delete the ITL File.
  3. Go to “ITL file” and erase it.

How to configure a Cisco IP phone?

On the Cisco IP Phone models 7905G/7912G, you can configure network settings through the phone’s web page or using the Network Configuration screen on the phone. This chapter describes various methods you can use to configure most network settings for the Cisco IP Phone.

How to use IVR on Cisco IP phone 7902g?

On the Cisco IP Phone 7902G, you can also review phone settings using the IVR system. See the “Using the Interactive Voice Response (IVR) System on the Cisco IP Phone 7902G” section . Step 1 Press the Menu button. Step 2 Use the Navigation button to select Settings, and then press the Select softkey.

Why is my Cisco IP phone 7905g locked?

On the Cisco IP Phone models 7905G/7912G, network configuration options in the Network Configuration Screen are locked by default to prevent users from making changes that could affect network connectivity for a phone. When settings are inaccessible for modification, a locked padlock icon appears on the Network Configuration screen.