How do I make my gravedigger power wheels faster?
You’re just going to be removing the rear wheels and axle, pulling off the gearboxes, putting the new motors in, then reassembling the rear axle/gearboxes/wheels. You’ll also need to upgrade the fuse to 40a and the self-resetting breaker to 40a, as these motors draw a lot more power at startup.
How fast does the Power Wheels Grave Digger go?
2.5 and 5 mph
Power Wheels By Fisher-Price® Monster Jam Grave Digger® Truck goes 2.5 and 5 mph max. forward; 2.5 mph max. reverse, drives on hard surfaces and grass, Power Lock® Brake System, and high speed lock-out for beginners.
Why does my Power Wheels keep blowing fuses?
Power Wheels fuses will blow up when the amp ampere of the battery is higher than that of the fuse. Parents need to check the ampere of their Power Wheels batteries before making an order for a replacement fuse.
How fast is grave digger?
Speeds here exceed 70 mph, which gives you pause when you consider that the steering of a monster truck is accomplished by four hydraulic rams and the truck runs on 66-inch tires intended for 30 mph.
How long does Grave Digger battery last?
bad truck for the price, doesn’t last, doesn’t run in grass, 10min battery life.
What kind of motor does Grave Digger use?
Today we’re going to upgrade the motors and pinions on the new Grave Digger ride on toy from Walmart. Common complaint on these cool little rides is that they are too slow. The stock motors are only 14,000 RPM @ 24v, so replacing them with the Traxxas 5675 motors will provide a big speed boost.
How do you change the wheels on a grave digger?
Lift the rear of vehicle with jack stands or a milk crate or whatever you have laying around that can support 100lbs or so. Unscrew the 1/2″ nut off each wheel. Pull the wheels off, then tap the axle out of it’s raceway.
What’s the speed increase on a grave digger?
The stock motors are only 14,000 RPM @ 24v, so replacing them with the Traxxas 5675 motors will provide a big speed boost. Expect the speed to increase from the stock 5mph to between 8-9mph after this upgrade. This is a relatively simple job.
Do you need to upgrade the fuse on a grave digger?
You’ll also need to upgrade the fuse to 40a and the self-resetting breaker to 40a, as these motors draw a lot more power at startup. If your kids are bigger (>50lbs) or your riding area is grassy/hilly, you might experience issues with blowing fuses. We solved this issue by installing an ESC kit.