How do you use Goodyear TYRE pressure gauge?
Check them regularly
- Use a pressure gauge.
- Take a reading when the tyres are cold.
- Unscrew the valve cap and place the gauge over the valve.
- Read the pressure on the gauge and compare it with your tyre’s recommended bar or psi.
What are the 3 types of tire pressure gauge?
Types. There are three types of tire-pressure gauges: stick, digital, and dial. Buy a gauge with a wide-enough range that it can measure the pressure in a temporary spare, which is typically 60 psi.
Where is the PSI on a Goodyear tire?
To find the proper air pressure for your tires, look in your vehicle’s owner’s manual, on the sticker on the driver’s side doorjamb, or in the glove box.
What gauge should my tires be?
Air pressure in tires is measured in pounds per square inch, or PSI; usually, the recommended pressure ranges between 30 and 35 PSI.
What PSI should my front Tyres be?
Checking your vehicle’s tyre pressures is easy!
|Tyre Size||Front Tyres||Rear Tyre|
|165/70R14 T 81||2.3 BAR / 34 PSI||2.1 BAR / 31 PSI|
|175/65R14 H 82||2.3 BAR / 34 PSI||2.1 BAR / 31 PSI|
|185/60R14 H 86||2.1 BAR / 31 PSI||2.1 BAR / 31 PSI|
|195/50R15 H 82||2.3 BAR / 34 PSI||2.1 BAR / 31 PSI|
Where is the tire pressure?
The first place to look for the correct air pressure for your specific tires is your vehicle owner’s manual. Correct air pressure should also be listed on the tire placard attached to the vehicle door edge, doorpost, glove box door or fuel door.
What is the best tire pressure?
32 to 35 psi
Most passenger cars will recommend 32 to 35 psi in the tires when they’re cold. The reason you check them cold is that as tires roll along the road, friction between them and the road generates heat, increasing tire pressure.
Does Goodyear inflate tires?
Come in to a Goodyear Auto Service location today and we’ll check your tire air pressure on your vehicle free of charge. We will also make sure there are no signs of damage, then return the tire to the correct PSI.
Does Goodyear use nitrogen in tires?
Goodyear supports the use of nitrogen, as an inflation gas, in all Goodyear, Dunlop, Kelly, Associate Brand and Private Brand products, based on the ability for a tire to retain pressure for a longer period of time. The use of nitrogen will not affect the tire warranty.
Is 40 PSI too high for tires?
The recommended tire pressure for most passenger and sports cars is between 32 and 40 psi, but you should check your vehicle’s manual for more specific instructions. The recommended tire pressure is set with cold tires so be sure to check them before or after a long ride.
How does the tread depth on Goodyear tires work?
Certain Goodyear tires, such as the Goodyear Assurance® MaxLife, have Goodyear’s Wear Gauge, which provides a visual indication of the tire’s remaining tread depth, allowing drivers to continually monitor their tires’ wear instead of simply providing a warning at the end of their life.
Where do I find the Goodyear Tire information placard?
Goodyear recommends that tires be inflated to the vehicle manufacturer’s recommendations as found on the Vehicle Tire Information Door Placard or the Vehicle’s owner’s manual. The placard can be located on the door edge, doorpost, glove box, or fuel door.
How often do Goodyear tires need to be checked?
Goodyear suggests checking your tire tread depth every 3,000 mi. (5,000 km) or once it reaches 4/32 inch deep. Below are a few simple tests to see if your tires need to be replaced. Penny Test for Tire Tread Wear Measurement Insert a penny into your tire’s tread groove with Lincoln’s head upside down and facing you.
How big is a tread depth gauge on a tire?
Typical tread depth gauges will measure in 32 nds of an inch, or 25-26 in millimeters. Some gauges have a needle-like design with a portion that expands to measure tread depth.