Categories :

What is ERW steel?

What is ERW steel?

ERW steel pipes are manufactured by low-frequency or high-frequency resistance “resistance”. They are round pipes welded from steel plates with longitudinal welds. It is used to transport oil, natural gas and other vapor-liquid objects, and can meet various requirements of high and low pressure.

Is ERW mild steel?

ERW (Electric Resistance Welded) and DOM (Drawn Over Mandrel) are both Mild Steel tubing and both are used in lots of applications.

What does ERW mean in welding?

Electric Resistance Welded
Electric Resistance Welded (ERW) pipe is manufactured by cold forming a flat steel strip into a rounded tube and passing it through a series of forming rollers to obtain a longitudinal seam. The two edges are then simultaneously heated with a high frequency current and squeezed together to form a bond.

How does ERW work?

Electric resistance welding (ERW) is a welding process where metal parts in contact are permanently joined by heating them with an electric current, melting the metal at the joint. The electric current can be supplied to electrodes that also apply clamping pressure, or may be induced by an external magnetic field.

What does ERW stand for?


Acronym Definition
ERW Electric Resistance Weld
ERW Extended Reach Well (petroleum engineering)
ERW Extreme-Right-Wing (parties)
ERW Enhanced Radiation Weapon

Is ERW tube strong?

Hot-Rolled ERW (HREW) is rolled into a tube at elevated temperatures. This process produces more malleable (easier to form) tubing, which is not as strong, covered with scale, and not as uniform in dimension as cold-rolled tubing.

What is ASTM A513 steel?

A513 steel is a high-carbon alloy that offers a uniform grain structure which gives it a strong, seamless and consistent structure. The high carbon content increases strength and rigidity while slightly lowering machinability and weldability.

What is the full form of ERW?

ERW (Electric Resistance Welded) pipes are welded longitudinally, manufactured from Strip / Coil and can be manufactured upto 24” OD. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through a electric charge.

What is ERW tube used for?

ERW tubes are used for engineering purposes, fencing, scaffolding, automobile sector, water and gas conveyance, agriculture, etc.

What is ERW pipe specification?

Welded pipe is also called ERW (Electric Resistance Welded) pipe. Most common specification for welded carbon steel pipe is A53. Seamless pipe is made by a process that requires no welding. Most common specification for seamless carbon steel pipe is A106B. Stainless Steel pipe is made to spec A312.

What is CEW pipe?

Electric resistance welded pipes (ERW steel pipe) are longitudinally welded from metal after moving it afterward. Welded tubes are cold drawn over mandrel when the application requires close dimensional resistance. They are called CEW tubes or CDW tubes.

How are electric resistance welding ( ERW ) pipes made?

The company produces ERW pipes for high grade linepipe by optimiz- ing the chemical composition and rolling conditions of the steel coils used as starting material, and optimizing the welding conditions and the seam heat treatment con- ditions during electric resistance welding.

What are the conditions for electric resistance welding?

The analysis was per- formed under conditions of outer diameter = 610 mm, wall thickness = 16 mm, welding speed = 0.2 m/s, and welding pressure = 5 mm. From Fig. 3, remarkable heat- ing occurred at the inside and outside corners beginning 200 mm from the weld point.

What are the benefits of HF ERW welding?

HF ERW which, generally requires minimal heat input, produces a narrow heat-affected zone (HAZ), resulting in improved weld properties. Architects and engineers are designing structures with new and innovative shapes due in part to new steel chemistries and improved flat rolling technologies.

How are laser welded tubes different from ERW tubes?

The heat affect zone for laser-welded tubes is much smaller than for ERW tubes. Oxidation and cavitation can also be avoided because the welding is finished in a protective atmosphere. The elongation of the weld line is quite similar with the based material, which is quite suitable for IHPF.