Categories :

How do I reset my Cisco ASA 5505 to factory settings?

How do I reset my Cisco ASA 5505 to factory settings?

  1. After you open connection, press enter a couple of times, and you should get a prompt like: ‘ciscoasa>’
  2. type ‘enable’ to go to enable mode.
  3. type ‘config t’
  4. type ‘config factory-default’
  5. hit spacebar when the ‘more’ is displayed.
  6. type ‘reload save-config noconfirm’

How do I delete a configuration on a Cisco ASA 5505?

With [ciscoasa# write erase] you will erase configuration file in flash startup-configuration. After this use reload on ASA. You will get cleared ASA configuration file, without DHCP Server any interface configured no ip addresses or NAT as you will get with factory default restart.

How do I save ASA configuration?

Save running config on Cisco device Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.

How do I reset my ASA 5510 to factory settings?

Resetting a Cisco ASA 5510 to Factory Defaults

  1. Connect your console cable and make sure you can see the command prompt for the ASA – even if you can’t log in.
  2. Power cycle the appliance – flick the power switch on the front off and on again.

How do I reset my ASA firewall password?

Reset Password in Cisco ASA Firewall

  1. Step 1: Login to Cisco ASA device with console cable and reboot the device.
  2. Step 2: Press ‘ESC’ key or ‘BREAK’ key on the keyboard to break the boot process.
  3. Step 3: Now, here is the trick.
  4. Step 4: Reboot the device.
  5. Step 5: When the ASA is booted, it will not ask for password.

How do you reset ASDM ASA 5506?

Firepower Management Center – Choose Devices > Device Management, double-click FTD, then choose the Device tab. In the System section, click the Restart Device icon. For both ASA and FTD security appliances, a physical power-cycle can be used in order to perform a reboot.

Is Cisco phasing out Asa 5505?

there has not been any announcement for phasing out Cisco ASA 5505, it is not in the pipeline as of now. But if you want to work on the new ASA models, that should definitely help you and give you an edge in the longer run.

Can the ASA 5505 span a port?

Span/mirror port on the ASA 5505 – The ASA 5505 has an eight port Ethernet switch in it making it unique among the ASA product line. Like all Cisco switches, this one also supports traffic span to allow you to capture packets and send them to a destination switchport for analysis.

What is Asa device?

The ASA in Cisco ASA stands for Adaptive Security Appliance. In brief, Cisco ASA is a security device that combines firewall, antivirus , intrusion prevention , and virtual private network ( VPN ) capabilities.