Categories :

How do I use Motorola Talkabout?

How do I use Motorola Talkabout?

Talking and Listening

  1. Hold your radio 2 to 3 cm from your mouth.
  2. Press and hold the PTT button while speaking. The Transmit icon appears on the display.
  3. Release the PTT button. You can now receive incoming calls. When you do, the Receive icon appears on the display.

What frequency do Motorola Walkie Talkies use?

462 MHz to 467 MHz
The radio operates in the frequency range of 462 MHz to 467 MHz. The output power level typically may vary over a range from 0.5 watts to 1.0 watt. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.

How do I use Motorola iVOX?

You can just as easily turn VOX on and use the radio with your headset.

  1. Push the “Power” button to turn on the Motorola Talkabout.
  2. Press the “Menu” button until your radio displays “iVOX.” Select “On” using the “+” or “-” key.

What is the range of Motorola Talkabout?

This colorful two-way radio has a range of up to 16 miles* and features 22 channels, providing you with just what you need to instantly reach your family and friends, and know they’re safe.

How do I pair my Motorola Talkabout Walkie Talkies?

Position the microphone approximately two to three inches away from your mouth. Hold down one of the two “PTT” buttons, located to the left of the LCD display. Speak your message into the microphone, then release the “PTT” button and wait for a response from another walkie talkie user.

What is the best frequency for walkie talkies?

Ultra-High Frequency (UHF) operates at 400-512 MHz. UHF two-way radios are best if there will be any indoor use, because the shorter radio waves can more easily penetrate obstructions that are found inside buildings.

How do I connect my Motorola walkie talkies?

How to Program Motorola Walkie Talkies

  1. Press the Menu button. The label “Code’ will appear on the read-out.
  2. Press the plus, up or negative, down button to choose a interference eliminator code.
  3. Press the Push-to-talk (PTT) button to enter the code.
  4. Program a call tone.