What is the blue buffing pad for?
Blue burnishing pads are used for scrubbing floors before the polishing stage. When using a blue buffer pad, select a chemical that helps clean the surface without removing the floor’s finish.
What color pad is best for polishing?
For very coarse and deep polishing up to very fine and high gloss. The green pad is most suitable for deep scratches and hard lacquers. The grey pad is most suitable for extreme gloss and soft lacquers. The yellow and white are in between.
What Grit is a white buffing pad?
600-grit
We can’t speak for every single manufacturer, but here’s the basic industry code: A white pad is extra-fine, approximately equivalent to 600-grit sandpaper; gray compares to 220-grit; maroon, 150-grit; and green, 100-grit.
What is a burnishing pad used for?
Ultra High Speed Burnishing Pads are used for the daily maintenance and restoration of coatings to moderate- or high-gloss sheen in a dry application, a process that is performed on high and ultra-high speed machines ( 1000-3000 RPM).
What GRIT is an abrasive pad?
Flexible abrasive pads are resistant to chemicals. Will not rust, splinter or shred like steel wool & provide a longer lasting surface than sandpaper. The Green replaces # 000 steel wool or equates to approximately 600 grit.
What does a burnishing pad do?
How do I choose a burnishing pad?
The correct pad for any given situation depends on the type of equipment and floor finish used. As a general rule of thumb, harder floor finishes require more aggressive pads while softer finishes respond better to less aggressive pads.
What kind of grooves do Hex logic pads have?
Hex-Logic surface grooves spread product evenly and conform pad to contoured surfaces. Hex-Logic offers a wide variety of pads that range in density, smoothness and finishing capabilities.
Can a black hex pad be used with a blue pad?
Like the blue pad above, The Composition of the black hex logic pad is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.
What do Hex logic polishing pads do for You?
Hex-Logic polishing pads are a completely redesigned and revamped version of your typical polishing pad to enhance your polishing performance and experience. Professional and enthusiasts love Hex-Logic pad for its newly reinvented design to change the way you polish.
Can a hex logic pad be used with menzerna?
The orange hex logic foam offers the correction of a typical compounding pad while at the same time allowing the polishing ability of light cut foam pad. When used with heavier compounds ( Such as Menzerna Heavy Cut ) it will remove moderate swirls and scratches with little or no haze.